RLM

The pilot pressure regulator/booster regulates the outlet
pressure through a signal pressure at ratio of 1 to 1.
Functioning as a pressure regulator the pilot pressure may
either be internally inducted from the inlet pressure or
externally. The dome chamber is closed by a needle valve.
Functioning as a volume booster the dome is controlled by
a proportional pressure regulator or a pilot pressure regulator.

Media: compressed air, non-corrosive gases or liquids

Supply pressure:
max. 25 bar for RL.-0.J1,
max. 100 bar for RL.-0.J2,
max. 40 bar for oxygen,
max. 1.5 bar for acetylene

Pilot pressure:
max. 24 bar for RL.-0.J1,
max. 99 bar for RL.-0.J2

Pilot port: G1/4

Accuracy:
at supply pressure variation of 10 bar = 0.1 bar pressure deviation
at temperature variation of 3 °C / K = 1% pressure deviation at internal pilot pressure

Air consumption: without constant bleed
Relieving function: non-relieving
Gauge port: not available
Mounting position: any, dome preferably mounted up

Temperature range:
-20 °C to 100 °C / -4 °F to 212 °F for FKM,
-40 °C to 130 °C / -4 °F to 266 °F for EPDM

Body: brass or stainless steel 1.4571
Inner valve: brass or stainless steel 1.4571
Elastomer: FKM, optionally EPDM