VR6

The modular, compact micro needle valve is for fine-flow
adjustment of gases and liquids. It consists of an inner valve
and body with straight or angle connector. The valve is free
from oil and grease.

Media: 5 µm filtered compressed air, non-corrosive gases or liquids

Operating pressure: vacuum up to positive pressure of max. 40 bar

Adjustment:
The micro valve has a 15-turn spindle to fully open from a closed
condition. It operates with virtually no hysteresis and closes
clockwise or optionally counterclockwise. The valve needle is
non-rotating and thus provides a stable adjustment.

Panel mounting: borehole 15 mm, mounting through two screws M4x10

Temperature range:
-40 °C to 100 °C / -40 °F to 212 °F

Body: anodized aluminium, optionally stainless steel
Elastomer: FKM, optionally EPDM
Inner valve: nickel-plated brass, optionally stainless steel
Knob: plastic