DS18

The pressure switch closes or opens an electrical contact when
the desired pressure is reached. If it falls below, the contact
will be reset.

Media: compressed air, non-corrosive gases or liquids

Overpressure: see chart for max. static pressure, dynamic pressures are 50% lower

Switch contact:
SPDT switch

Contact load:
4 A at 250 V AC

Electrical connector:
spade terminal 6.3 x 0.8 mm

Hysteresis:
adjustable to 10...30% by factory

Life cycle: 106 switching cycles at < 50 bar
Switching frequency: max. 200 cycles/min

Vibration resistance: 10 g at 5...200 Hz
Shock resistance: 30 g

Certifications: CSA-certified and UL-listed

Mounting position: any
Protection class: IP 00, with coupling socket IP 65

Temperature range:
-30 °C to 100 °C / -22 °F to 212 °F for NBR/Buna-N,
-30 °C to 120 °C / -22 °F to 248 °F for EPDM,
-5 °C to 120 °C / 23 °F to 248 °F for FKM

Body: steel, optionally stainless steel at DS18
Elastomer: NBR/Buna-N, optionally EPDM or FKM