MKA

Suitable for measurement of positive pressure, vacuum or
differential pressure.

Media: compressed air or non-corrosive gases
Overpressure: see chart
Supply voltage: 15...30 V DC standard, optionally 230 V AC ± 10%
Electrical connector: plug with 7-pin screw terminal for cable
cross-sectional area 0.14...1.5 mm²

Pneumatic connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure is to
be connected at P+;
plug nipple up to 1 bar, sleeve with union nut from 2 bar on,
each for hose internal diameter of Ø 4 mm

Display:
31/2-digit LCD display, max. ± 1999, 14 mm tall, black numbers
red LED lights up at overpressure, then measurement is faulty

Output signal:
0...10 V, impedance > 10 kΩ,
optionally 4...20 mA, impedance < 500 Ω

Linearity: see chart, optionally 0.2% FS
Hysteresis: < 0.1% FS

Long-term stability:
< 0.1% FS per year at > 25 mbar,
< 1.0% FS per year at > 5 mbar,
< 2.0% FS per year at < 5 mbar range

Temperature sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Response time: 100 ms
Resolution: 1 digit
Protection class: IP 54

Temperature range: -20 °C to 50 °C / -4 °F to 122 °F

Housing: aluminium